Strong Squeezing of Duffing Oscillator in a Highly Dissipative Optomechanical Cavity System

In the conventional scheme of generating strong mechanical squeezing by the joint effect between mechanical parametric amplification and sideband cooling, the resolved sideband condition is required so as to overcome the quantum backaction heating. In the unresolved sideband regime, to suppress the quantum backaction, a χ⁽²⁾ nonlinear medium is introduced to the cavity. The result shows that the quantum backaction heating effect caused by unwanted counter-rotating term can be completely removed. Hence, the strong mechanical squeezing can be obtained even for the system far from the resolved-sideband regime.     

Blow-up of solution for beam equation with delay and dynamic boundary conditions

In this paper, we consider an elastic beam equation with delay, source term, and boundary conditions together with some suitable initial data. Using the Faedo-Galerkin approximation and some estimates, we get the local existence of solution. Moreover, we obtain the finite time blow-up of solution by constructing suitable Lyapunov functionals.     

Dynamical Analysis of a New Chaotic Fractional Discrete-Time System and Its Control

This article proposes a new fractional-order discrete-time chaotic system, without equilibria, included two quadratic nonlinearities terms. The dynamics of this system were experimentally investigated via bifurcation diagrams and largest Lyapunov exponent. Besides, some chaotic tests such as the 0–1 test and approximate entropy (ApEn) were included to detect the performance of our numerical results. Furthermore, a valid control method of stabilization is introduced to regulate the proposed system in such a way as to force all its states to adaptively tend toward the equilibrium point at zero. All theoretical findings in this work have been verified numerically using MATLAB software package.     

Theoretical investigation of the crystallographic structure,anisotropic elastic response,and electronic properties of the major borides in Ni-based superalloys

ABSTRACT

In Ni-based superalloys, it is usually found that borides can strengthen the grain boundaries, thereby resulting in an increase in mechanical strength and high-temperature creep properties. Due to their importance and prevalence in Ni-based superalloys, this study employs first-principles methods to investigate the crystallographic structure, anisotropic elastic response, and electronic properties of the major borides, such as M₂B, M₅B₃ and M₃B₂ (M: Cr, Mo, W), respectively, which is necessary for the assessment of complex mechanical responses of Ni-based superalloys. The results demonstrate that the studied borides are all thermodynamically and mechanically stable. Among the M _x B _y binary borides analysed, Cr _x B _y exhibits the largest shear modulus, Young’s modulus, and Vicker hardness values, and these properties increase with the increase of B contents. The studied borides display nearly isotropic elastic properties except for W₅B₃ and W₃B₂. The electronic structure analysis of M _x B _y shows that the strong hybridisation between M-d and B-p orbitals leads to these borides exhibiting higher theoretical hardness, and the overlapping peaks of M-d and B-p orbitals move to a lower energy area with the increase of B contents, which leads to the increase of shear and Young’s moduli of M _x B _y . Furthermore, for M₃B₂ borides, the Cr-B bonds and Cr–Cr bonds are much stronger than the W-B & Mo-B bonds, and W-W & Mo-Mo bonds, respectively, which leads to Cr _x B _y yielding the largest values of elastic moduli.     

A Comparative Study of the Semiconductor Behavior of Organic Thin Films: TCNQ-Doped Cobalt Phthalocyanine and Cobalt Octaethylporphyrin

The structure formed by cobalt phthalocyanine (CoPc) and cobalt octaethylporphyrin (CoOEP) with electron-acceptor tetracyano-π-quinodimethane (TCNQ), was studied by Density Functional Theory (DFT) methods. According to theoretical calculations, both cobalt systems can establish dispersion forces related to TCNQ and also in both cases the link between them is built by means of hydrogen bonds. Based on the results of these DFT calculations, we developed experimental work: the organic semiconductors were doped, and the thermal evaporation technique was used to prepare semiconductor thin films of such compounds. The structure of the films was studied by FTIR and Raman spectroscopy. The optical properties of the CoPc-TCNQ and CoOEP-TCNQ films were investigated by means of UV-Vis measurements. The results obtained were used to estimate the type of transitions and the optical bandgap. The results were compared to the previously calculated theoretical bandgap. The CoOEP-TCNQ film presented the smallest theoretical and experimental bandgap. Finally, the electrical properties of the organic semiconductors were evaluated from a PET (polyethylene terephthalate)/indium tin oxide (ITO)/cobalt macrocycle-TCNQ/silver (Ag) device we prepared. The CoOEP-TCNQ-based device showed an ohmic behavior. The device manufactured from CoPc-TCNQ also showed an ohmic behavior at low voltages, but significantly changed to SCLC (space-charge limited conductivity) at high voltage values.     

Multifunctional Sulfur-Hyperdoped Silicon Nanoparticles with Engineered Mid-Infrared Sulfur-Impurity and Free-Carrier Absorption

Si nanoparticles (NPs), which are innovative promising light-harvesting components of thin-film solar cells and key-enabling biocompatible theranostic elements of infrared-laser and radiofrequency hyperthermia-based therapies of cancer cells in tumors and metastases, are significantly advanced in their near/mid-infrared band-to-band and free-carrier absorption via donor sulfur-hyperdoping during high-throughput facile femtosecond-laser ablative production in liquid carbon disulfide. High-resolution transmission electron microscopy and Raman microscopy reveal their mixed nanocrystalline/amorphous structure, enabling the extraordinary sulfur content of a few atomic percents and very minor surface oxidation/carbonization characterized by energy-dispersive X-ray spectroscopy and X-ray photoelectron spectroscopy. A 200-nm thick layer of the nanoparticles exhibits near−mid-infrared absorbance, comparable to that of the initial 380-micron thick n-doped Si wafer (phosphor-dopant concentration ≈10¹⁵ cm⁻³), with the corresponding extinction coefficient for the hyperdoped NPs being 4–7 orders higher over the broadband spectral range of 1–25 micrometers. Such ultimate, but potentially tunable mid-IR structured, multi-band absorption of various sulfur-impurity clusters and smooth free-carrier absorption are break through advances in mid-infrared (mid-IR) laser and radiofrequency (RF) hyperthermia-based therapies, as envisioned in the RF-heating tests, and in fabrication of higher-efficiency thin-film and bulk photovoltaic devices with ultra-broad (UV−mid-IR) spectral response.     

Dinuclear gold (I)-di-N-heterocyclic carbene complexes: syntheses,structure, density functional theory calculation and photoluminescence study

The synthesis and characterizations for a series of dinuclear gold (I)-di-NHC complexes, 1–8 through the trans-metalation method of their respective silver (I)-di-NHC complexes, i–viii are reported (where NHC = N-heterocyclic carbene). The successful complexation of a series of unusual non-symmetrical and symmetrical di-NHC ligands, 3,3'-(ethane-1,2-diyl)-1-alkylbenzimidazolium-1'-butylbenzimidazolium (with alkyl = methyl, ethyl, propyl, butyl, pentyl, hexyl, heptyl, benzyl) with the gold (I) ions are suggested by elemental analysis, Fourier transform-infrared, ¹H- and ¹³C-NMR data. The ¹³C-NMR spectra of 1–8 show a singlet sharp peak in the range of 190.00–192.00 ppm, indicating the presence of a carbene carbon that bonded to the gold (I) ion. From single crystal X-ray diffraction data, the structure of complex 6 with the formula of [di-NHC-Au (I)]₂·2PF₆ is obtained [where NHC = 3,3'-(ethane-1,2-diyl)-1-hexylbenzimidazolium-1'-butylbenzimidazolium]. The photophysical study in solid state of 6 displays an intense photoluminescence with a strong emission maxima, λ_em = 480 nm, upon excitation at 340 nm at room temperature. Interestingly, the emission maximum at 77 K shows a structural character with a strong peak at 410 nm, a medium at 433 nm and a weak at 387 nm, accompanied by a tail band to about 500 nm.     

Controlled synthesis of ZnO nanoparticles from a Zn(II) coordination polymer: Structural characterization,optical properties and photocatalytic activity

A zinc coordination polymer derived from pyridine-2,6-dicarboxylate (PDC), {[Zn₂(PDC)₂]}_n, was successfully prepared via conventional, sonication and microwave-irradiation methods. The composition and characteristics of the obtained coordination polymers (CPs) were investigated by elemental analysis, TGA/DTA, X-ray diffraction and spectroscopic techniques. The so obtained CPs were heat-treated in the air at 600 °C for 2 h to produce ZnO of nanosized particles (NPs). It is of interest to note that the synthesis approach of the precursor greatly affects both the nanoparticle size and the structure of the resulting ZnO NPs. Moreover, the smallest particle size was associated with the sample derived from the ultrasonically prepared precursor. TEM analysis revealed that all samples have sphere-like morphologies. Structural analysis of the prepared ZnO samples was conducted and compared using Rietveld analysis of their PXRD patterns. Optical band gap calculations based on analysis of the UV–vis spectra of ZnO samples using Tauc's power law were achieved. The highest band gap of 3.63 eV was observed for ZnO sample obtained from the ultrasonically prepared precursor. Furthermore, the photocatalytic activity of ZnO NPs for the removal of Eosin Y color was monitored. The highest removal efficiency was recorded for ZnO originated from the ultrasonically synthesized precursor. Enhancement of removal efficiency that reached 98% was attained in only a period of 8 min. Its recycling test showed that it can be reused without structural changes over four cycling experiments.     

Comparative bioavailability of two zolpidem hemitartrate formulations in healthy human Brazilian volunteers using high-performance liquid chromatography coupled to tandem mass spectrometry

To assess the bioequivalence of two zolpidem hemitartrate formulations in 30 healthy volunteers. Plasma samples were obtained over a 24 h period. Plasma concentrations of zolpidem were analyzed by liquid chromatography coupled to tandem mass spectrometry with positive ion electrospray ionization using multiple reaction monitoring. Values of peak concentration (C_max), area under curve (AUC), half-life, elimination constant, volume of distribution and clearance showed statistically significant differences when comparing women (604.34 ng h/ml, 127.36 ng/ml, 4.4 h, 0.18 1/h, 50.56 L and 8.55 L/h, respectively) and men (276.1 ng h/ml, 70.9 ng/ml, 3.3 h, 0.26 1/h, 91.42 L and 24.34 L/h, respectively), receiving the same dose (5 mg), respectively. The geometric means with corresponding 90% confidence interval for Test/Reference percentage ratios were 99.73% (CI 93.69–106.16) for C_max, 97.44% (90% CI = 91.85–103.37%) for area under curve of plasma concentration until the last concentration observed (AUC_last) and 98.30% (90% CI = 92.48–104.49) for the area under curve between the first sample (pre-dosage) and infinity (AUC_0–inf). Since the 90% CI for AUC_last, AUC_0–inf and C_max ratios were within the 80–125% interval proposed by the US Food and Drug Administration, it was concluded that zolpidem hemitartrate formulation (5 mg orodispersible tablet) is bioequivalent to the zolpidem hemitartrate formulation (Patz SL 5 mg sublingual tablet) with regard to both the rate and the extent of absorption. A new formulation of zolpidem 2.5 mg may be useful in women for the same clinical benefits as the 5 mg formulation in men.     

Volatile organic compounds in head and neck squamous cell carcinoma—An in vitro pilot study

Owing to the lack of specific symptoms, diagnosis of head and neck squamous cell carcinoma (HNSCC) may be delayed. We evaluated volatile organic compounds in tumor samples from patients suffering from HNSCC and tested the hypothesis that there is a characteristic altered composition in the headspace of HNSCC compared with control samples from the same patient with normal squamous epithelium. These results provide the basis for future noninvasive breath analysis in HNSCC. Headspace air of suspected tumor and contralateral control samples in 20 patients were analyzed using ion-mobility spectrometry. Squamous cell carcinoma was diagnosed in 16 patients. In total, we observed 93 different signals in headspace measurements. Squamous cell carcinomas revealed significantly higher levels of volatile cyclohexanol (0.54 ppb_v, 25th to 75th percentiles 0.35–0.86) compared with healthy squamous epithelium (0.24 ppb_v, 25th to 75th percentiles 0.12–0.3; p < 0.001). In conclusion, head and neck squamous cell carcinoma emitted significantly higher levels of volatile cyclohexanol in headspace compared with normal squamous epithelium. These findings form the basis for future breath analysis for diagnosis, therapy control and the follow-up of HNSSC to improve therapy and aftercare.